Tel./WhatsApp:
+86 15266206885
E-mail:
[email protected]
Avoid your inquiry is delay response, please enter your WhatsApp/Skype along with the message, so we can contact you at the very first time.
We will reply you within 24 hours. If for urgent case, please add WhatsApp/WeChat: ,. Or call directly.
 |
TOUCH SCREEN The machine adopts a touch screen control panel, with parameters that can be directly set and also with monitoring screen. When the machine malfunctions, the monitoring screen will prompt the cause of the fault, making it convenient for maintenance personnel to check and solve it in a timely manner. |
| FREQUENCY CONVERTER The machine has three frequency converters, which control the turntable motor, film carriage motor. and column motor respectively.All speeds are adjustable. |
 |
 |
CONTROL PANEL Including 3 knobs for start, pause, emergency stop buttons, and speed adjustment (turntable rotation, up and down reciprocating operation of film carriage, and output of stretch film), convenient and fast for users. |
| FILM CARRIAGE Pre stretched film carriage, with a stretching ratio of up to 250%, saves stretch film, the outer layer of the roller with coated rubber, and increases the friction between the roller and the stretch film. This machine can use machine stretch film with a width of 500mm or less. |
 |
 |
HEAVY TURNTABLE The diameter of the turntable is 1650mm (5.5 feet), and 8units of nylon rollers are used at the bottom to enhance the load-bearing performance of the turntable, with a load capacity of up to 2000kg (4400lbs).The bottom is welded with thickened steel plates, which are durable and not easily deformed. |
| TURNTABLE MOTOR WIRE After set up the machine column, it is necessary to connect the wire of the turntable motor to the electrica! control box. in order to avoid wiring errors or reduce wiring steps, we directly design it in the form of a plug and insert it directly. This not only saves installation time but also provides good protection for the end of the wire. |
 |
 |
WEIGH SCALE If you also want to weigh the pallet, the machine can add a weighing function. A weighing sensor is installed at the bottom of the turntable, and the weight of the pallet will be directly displayed on the weighing panel. |
| RAMP When there is no forklift, a hand pallet jack can be used to move the pallet onto the machine turntable through a ramp.the ramp is made of thickened steel plates welded together, with a large load-bearing capacity and a patterned surface treatment, which increases the friction with hand pallet jack and enhances safety |
 |
|
Product Name
|
Pallet stretch wrapping machine
|
|||
|
Model
|
ST1650F
|
|||
|
Voltage
|
AC110-240V 1Phase
|
|||
|
Power
|
1.5kw 50-60Hz
|
|||
|
Turntable height
|
85mm
|
|||
|
Turntable max loading capacity
|
2000kg
|
|||
|
Film carriage
|
Pre-stretch system
|
|||
|
Automatic detect cargo height
|
Yes,by Photoelectricity sensor
|
|||
|
Max wrapping size(standard machine)
|
L1200*W1200*H2000mm(Other sizes can be customized)
|
|||
|
Control panel
|
Touch screen
|
|||
|
Machine dimension
|
L2550*W1650*H2485mm
|
|||
|
Machine weight
|
550kg
|
|||
|
PE stretch film roll specification
|
width:500mm;inner diameter:76mm;thickness:20-30mic
|
|||
|
Optional functions
|
Scale,top press plate,load ramp
|
|||
Chinese